e-Boutique
"HOT BUTTONS" - ALUMINUM SEAT TRIM RINGS (50 PCS)Add the look that the Original Ford Concept Car had in it's early design. The interior just “pops” with these buttons installed. Matte, anodized aluminum silver finish to match the existing interior design. Very easy, press-fit installation. Just push them into place without the use of adhesive. The rings can be removed and will not leave any marks.
|
SOFT-TOUCH ELBOW RESTS (2 PCS)Why should a Supercar lack comfort features? The Soft Touch Elbow pads are the perfect addition to the somewhat Spartan interior of the GT. These sorely missing elbow rests (no pun intended) will give your arm comfort and match the interior perfectly. Stock-looking, soft-molded cushions to pad your elbows/arms while driving. Easy to install. No holes to drill.
|
2pc - GT Customized Floor Mat SetThe original GT Floor Mats were not designed for functionality. The original GT rubber floor mats do not wear well. The GT Floor Mats are made to replace the factory floor mats. By removing the factory mats a void is left in the floor. These mats fill the void and makes the GT interior look sharp. Dirt and sand can be vacuumed, rather than scratching the floors. Your Production number can be added below the logo. Optional color combinations are also available.
|
Alcantara® Suede - GT Diamond Quilted GT Door InsertsThese Black Charcoal Alcantara® Door Inserts are stitched with a Diamond Quilted pattern, with Silver stitching to match the GT Interior. Adding just a bit more Supercar class look to the GT Interior . Pads are just stuck on to the factory door panel with adhesive. Can be removed in the future without leaving marks. (Also available in custom stitch color to match your preference) The default stitch color is Silver, for other stitching colors please indicate stitching color in order comments.(Production time is appx 1 week - prior to shipping)
|
HIGH POLISH BILLET RACING SHIFTER KNOB & SLEEVEA replacement shifter knob for the GT. Fatter racing style knob, better grip, high polish Billet Aluminum. GT Shift pattern engraved on top, with double pinstripe surround, which can be enamel filled to your GT's factory paint code. Perfect finishing touch for your interior. Very similar to the now discontinued Ford Racing Shifter Knob.
|
|
GT Aluminum Shifter SleeveThis Aluminum Shifter Sleeve slides over the factory shifter shaft, giving the shaft a much thicker and aggressive look. Simply unscrew factory Shifter knob, screw sleeve over exisiting shaft, replace shift knob. Ford Racing has discontinued their Shifter sleeve/Knob kit. We are now reproducing.
|
L.E.D. Engine Illumination Kit w/ Wireless RemoteThe Engine Illumination Kit lights up the GT powerhouse at night! 2 - L.E.D. Illumination strips are included in the kit. Available in RED, WHITE and BLUE, the waterproof L.E.D. strips utilize the latest flat mount LED technology. The kit will require proffesional installation. Also contained in the package is a wireless remote control system so the lights can be turned on or off any time.When Ordering please indicate your color of choice in Paypal comments field
|
Ford GT Upper Seat InsertsThese pieces are jaw dropping exact replicas of the plastic seat back pieces (with GT engraved in them) that your safety harness will go through and will match the hot buttons on the prototype car that Ford displayed. In peforming the machining process for the prototype it started out to be a 24 hour process to make a complete set but our machinists has had the program modified by the manufacturer as well as using different cutters and now we have the process down to a 7 hours per set. We have had this in the works for several months and finally we're ready for production. This set will replace the OEM plastic fronts only as you will reuse the OEM plastic back pieces on each seat.Purchase by clicking below
|
GT BILLET ALUMINUM SHIFTER BOOT BEZEL AND PARKING BRAKE BOOT COMBOThe original GT Shift/Parking Brake boots are made from rubber and are prone to aging and cracking. Also, owners that have upgraded to the short shift kit are plagued with an ill fitting boot. Our custom-designed combo consists of a beautifully crafted billet-aluminum shifter bezel with an integral shift boot plus a replacement parking brake boot. Easy installation. No modifications required. Fits both, the standard or the short shifter.* Please note: pictures of this product are shown on our test car that is fitted with an aftermarket shifter ball and shaft. ** SOLD OUT! *** Will fit factory shifter sleeve or aftermarket Ford Racing Shifter Shaft. |
GT Clear Vision Wiper Arm Kit - Replacement Kit
Tired of the OEM wiper blades obstructing your field of view? Getting sick of having F-150 stock wiper arms/blades on your GT? The custom designed Carbon Fiber wiper arms will give you an additional field of view. Not to mention the Wiper Arms are contoured to the GT's bonnet line. |
|
|













